When a hard drive suffers a severe impact, it typically damages the heads, but in some cases it can also jam the spindle bearing. In older drives, the oil that’s used in the fluid dynamic bearing (FDB) can degrade or leak from age and cause a spindle failure even without any impact. In either case, the motor can’t spin and you lose access to your data. In both of those cases, the platter(s) would need to be moved to a functioning chassis with a good motor and bearing.
While those scenarios are easily detected, there is a failure of the FDB that can go undetected by some technicians. In certain cases, the oil can leak out and contaminate the platter surfaces and heads. This type of hard drive failure requires a platter swap to a compatible working chassis too, but it also requires that the oil be cleaned from the platter(s).
Signs of an oil leak: Quite often there is only a small amount of oil that leaks, which is why it might go undetected if not properly inspected. We have a number of companies that outsource cases to us, and not all of them inspect the heads under a microscope when diagnosing the failure to determine if they are going to forward the case to us. In many cases, the signs of an oil leak may only be visible under magnification by inspecting the sliders under a microscope. Some failures are more easily detected, when lubricant is visible on the inside of the drive’s top cover, on the floor of the chassis where the head-stack parks, or for the worst cases, the lubricant is visible on the top platter surface.
Recently, a company outsourced a 2TB WD portable drive to us that had so much oil on the top surface that they could have confused it for platter damage (SEE PHOTO 1). In a case like this, we have to clean the oil from the surface. Once it’s properly cleaned, the platter looks like new again (SEE PHOTO 2).
One of the most important parts of hard drive recovery is the inspection process. Without proper tools, a checklist, and experience, certain failure types might go undetected and lead to an unrecoverable case. Slightly bent heads, contaminated sliders, broken piezoelectric micro-actuators, and oil residue are often undetectable without thorough investigation under a microscope.
If you have recently suffered a hard drive failure, we are ready to help recover your data. We have flat rates that include parts, and we provide free return media and return shipping. You know upfront what it will cost to get your recovered data returned to you. No diagnostic fees or haggling over the estimate like other data recovery labs. We also have a “no data, no charge” policy. Check out our flat rates for hard drive data recovery.